Leave Your Message

Multi-functional Slip-Form Paver for Road Construction

The multi-functional slipform paver is a versatile cement concrete construction equipment independently developed by our company. It is multi-purpose, capable of various mold configurations, and widely used in the construction of road drainage ditches, drainage channels, curbs, shoulder stones, concrete guardrails, cement concrete structures, and farmland irrigation canals. It replaces traditional processes, significantly improving the construction quality and speed of cement concrete structures.

This machine boasts high power reserve, fully electronic control, full hydraulic power drive, proportional control, three-track walking, and is equipped with an automatic steering and automatic leveling control system. It completes the vibration, paving, and extrusion molding processes of cement concrete structures in one operation.

    Features    

    1. Multi-functional: By changing various molds and precisely adjusting and controlling the vehicle's status, it can accurately slipform pave roads, drainage ditches, curbs, shoulders, concrete guardrails, and farmland irrigation canals.
    2. Three-track walking system: Hydraulically independent drive, proportional control dual-speed motor, high-ratio planetary gear reducer, closed-loop control of paving speed, PID adjustment to ensure paving speed stability and improve slipform paving quality; the three-track steering device is equipped with displacement sensors, enabling crab-like walking and coordinated steering with a small turning radius, ensuring rapid equipment positioning.
    3. Powerful engine: Meets National Stage III emission standards; the hydraulic system uses load-sensitive variable control, supplying oil according to actual load and speed, resulting in low fuel consumption and energy saving.
    4. User-friendly control panel: The human-machine interface control screen with clear graphical symbols makes paver operation simple and easy; equipped with an IoT platform, construction management and monitoring system, and optional remote control device.
    5. The steering and lifting system employs hydraulic proportional control and is equipped with two longitudinal slope sensors, one cross slope sensor, and two steering sensors. The sensors and controller communicate via a CAN bus, improving the equipment's response speed and stability, ensuring precise linear control, and enabling superimposed paving.
    6. Depending on the working conditions, right-side paving and center-mounted paving can be achieved; the right front outrigger's inward and outward swing, and the left front and rear outriggers' extension and retraction are hydraulically adjustable, providing greater adaptability; the mold fixing device uses hydraulic horizontal and vertical bidirectional adjustment, allowing for quick replacement of various molds.
    The auger conveying device's swing, tilt angle, and extension are hydraulically adjustable, making operation convenient and suitable for various working conditions; the large storage space allows for secondary mixing of cement concrete.

    Technical parameters

    Engine Brand Cummins
    Model 4BTAA3.9-C130 QSB3.9-C130 Cummins QSF3.8
    Rated Power 97KW/2500RPM 97KW/2300RPM 104kW/2200rpm
    Inhale mode Turbocharged/air-cooled
    Displacement 3.9L 3.9L 9L
    Control mode Non-EFI EFI EFI
    Minimum fuel consumption rate 205g/kwh 198g/kwh  
    Walking system Crawler 3 (front 2/rear 1) continuously variable gear
    Paving speed 0-15m/min 0-15m/min
    Walking speed 0-1.4km/h 0-30m/min
    Steering mode Front wheel,rear wheel,full wheel,crab row,synergy
    Profiling mode Front/rear/all-wheel automatic guidance
    Height adjustment Outriggers 3 strips,hydraulic lifting
    Mode of operation 3 legs independently / simultaneously lifted
    Leg lifting height 1m
    Control mode Electro-hydraulic proportional control
    Leveling method Front and rear height automatic control/cross slope control
    Screw conveyor Blade φ420,30pc
    Control mode Closed system,stepless adjustment,forward/reverse
    Attitude adjustment Shifting/telescopic/elevation/swing
    Maximum feed volume 50m3/h
    Vibrator Brand American,Minich
    Drive mode Hydraulic actuation,frequency proportional adjustment
    Qty. 3 pieces of standard configuration,3 interfaces reserved
    Concrete mold Location Left/Right
    Maximum mold height 1200/1300mm
    Maximum mold width 1300/1500mm
    Forming molds Interchangeable,customized according to actual engineering
    Shift/Lift 800/1000mm/400/500mm
    Formed seal Hydraulic cylinder,4 pieces
    Electrical performance Voltage DC24V
    Storage battery 2pc,120Ah
    Controller Imported
    Guide/level sensor Imported
    Parameter display Color LCD touch screen
    Volume Diesel tank 120/200L
    Hydraulic tank 190/280L
    Water tank 120/500L
    Shipping parameters Height 3.2/3.4M
    Length 6.5/6.9M
    Width 2.5M
    Weight 13T

    Delivery And Service

    Multi-functional Slip-Form Paver (6)
    Multi-functional Slip-Form Paver (7)
    Multi-functional Slip-Form Paver (2)
    Multi-functional Slip-Form Paver (1)
    Multi-functional Slip-Form Paver (3)
    Multi-functional Slip-Form Paver (4)
    Multi-functional Slip-Form Paver (6)
    Multi-functional Slip-Form Paver (7)
    Multi-functional Slip-Form Paver (2)
    Multi-functional Slip-Form Paver (1)
    010203
    Keep In Touch

    Contact Us

    We are committed to providing you with the best quality service and look forward to communicating with you to solve problems together and bring you a better experience.